IGCSE Design & Technology (0445) — May–June 2023, Paper 32
13 questions · every question answerable online with instant point-by-point AI marking against the official mark scheme.
Start with Question 1 →Fig. 1.1 shows a variety of television remote controls. State three specification points a designer would need to consider when designing a television remote control.
Answer this question and get it marked →Fig. 2.1 shows a shaped piece of hardwood. State from the list below the correct name for the types of grain labelled at A and B in Fig. 2.1. List: cross, short, patterned,…
Answer this question and get it marked →Fig. 3.1 shows a cross-sectional view of an injection moulding machine (A is labelled Hopper). Complete Table 3.1 by stating the name of the components B, C and D.
Answer this question and get it marked →Fig. 4.1 shows one part, the yoke, of a two-piece former used to produce the press formed moulding. Complete Fig. 4.1 by drawing the plug over which the yoke will fit to produce…
Answer this question and get it marked →Circle from the list below one metal that is a pure metal. List: mild steel, brass, stainless steel, aluminium.
Answer this question and get it marked →Fig. 6.1 shows the back of a shelf unit and details of two keyhole plates (brass 25 x 25 x 1 mm thick) used to fit the shelf unit to a wall. Fig. 6.2 shows a piece of 1 mm thick…
Answer this question and get it marked →Fig. 7.1 shows a table number stand used in a cafe and a development (net) of the stand. (a) Name a suitable non-ferrous metal for the number stand.
Answer this question and get it marked →Fig. 8.1 shows a through housing joint marked out on a length of hardwood (housing 30 wide x 20 deep, board 80 long, with waste). Complete Table 8.1 by describing the process each…
Answer this question and get it marked →Circle from the list below one material that is biodegradable. List: polystyrene, hardboard, tin, nylon, copper.
Answer this question and get it marked →Fig. 10.1 shows a trophy made of 5 mm thick acrylic, produced using CAD/CAM, with the words 'Top Team 2023' engraved on the star shape. Complete Table 10.1 by describing three…
Answer this question and get it marked →(a) The designer would consider a number of specification points. The list already states the guitar stand must 'be adjustable to support different types of guitar'. Add two…
Answer this question and get it marked →(a) Table 12.1 shows a parts list for the coin box. Complete Table 12.1 by providing the missing dimensions (front: 170 x ? x 10 MDF; side: ? x ? x 10 MDF; base: 170 x 100 x 10…
Answer this question and get it marked →(a) Give two benefits of using acrylic for the bird feeder.
Answer this question and get it marked →